Skip to content 
Home – Our Products – CPC
Home – Our Products – CPC
CPC Series
Overview
CPC Series represents a range of horizontal centrifugal pumps suited for handling low-viscosity, clean or slightly contaminated liquids. The pump is designed to EN22858/ISO 5199; however the number of available types is somewhat larger, which provides a wider hydraulic field.
A characteristic of the CPC Series is the large number of material, shaft seal and bearing system options. The modular design offers maximum interchangeability between the variants. Hence CPC Series is able to handle most pump duties. If more sophisticated components are required, only the relevant bearing or shaft seal module needs to be replaced with the one having the right specifications.
CPC Series
Overview
CPC Series represents a range of horizontal centrifugal pumps suited for handling low-viscosity, clean or slightly contaminated liquids. The pump is designed to EN22858/ISO 5199; however the number of available types is somewhat larger, which provides a wider hydraulic field.
A characteristic of the CPC Series is the large number of material, shaft seal and bearing system options. The modular design offers maximum interchangeability between the variants. Hence CPC Series is able to handle most pump duties. If more sophisticated components are required, only the relevant bearing or shaft seal module needs to be replaced with the one having the right specifications.
Available Seal Types
- Single Spring Mechanical Seal
- Rubber Bellow & PTFE Bellow Type Mechanical Seal
- Single Cartridge Mechanical Seal
- Double Cartridge Mechanical Seal
Safety Matters
Some Seal type arent fit for specific liquids, and hense SM series self priming centrifugal pumps come in multiple choices of seal type. Our team will also provide the best seal configuration for your use case scenario if you contact us with your queries.
Safety Features
Max Flow
1500 m³/hr
Impeller
Design
Closed & Semi Open
Impeller
Max Head
160 m
Designing
Standard
EN 22858 / ISO 5199
Seal
Standard
EN 12756 (DIN 24960)
Max Temp 200°C
Safety Features
Max Flow
1500 cubic meter / hour
Impeller Design
Closed & Semi Open Imepeller
Max Head
160 meter
Designing
Standard
EN 22858 / ISO 5199
Designing
Standard
EN 12756 (DIN 24960)
Designing Standard 200°C
- Available in various materials
- Only 5 Shaft Groups fir the whole range allows for a great interchangeability of parts
- Suitable for a wide range of duties
- Mechanicals seals according to the EN 12756 (DIN 24960)
- Available in Gland Packing & Mechanical Sealing Options.
- Single & Double Cartridge Seal Options
- Oil or Grease Lubrication for Ball Bearings
- Back Pull-Out Design for easy maintenance saving a lot of time
- Parts are always available for immediate servicing and lowest downtime of your plant
- Easy maintenance design
Industrial Usage
Dyes & Intermediate Application
Chemical Industries
Textile Industry
50 Hz (2900 & 1450 RPM)
60 Hz (3600 & 1800 RPM)
